OVERVIEW

  • Epoxy Concrete Crack Injection
  • Honeycomb Repair
  • Electrical Hydro Panel & Conduit Leak Repairs
  • Cold Joint Repair
  • Beam Pocket Leak Repair

01. PROS OF EPOXY

Epoxy is the recommended repair for most concrete cracks. In fact, approximately 85% of our injections are epoxy Resin Crack Injections. Thats because epoxy resin not only stop water from entering your cracked concrete foundation wall, but it also provides structural strength. Ask any structural engineering firm, epoxy is the recommened repair for all concrete crack repair.

02. CONS OF EPOXY

The problem with epoxy, all though it is the recommmended repair, it cannot be injected into a wet or leaking crack. The crack must be dry in order for the epoxy resin to bind to the concrete for a water tight seal. In case of a wet crack, and repair must be done ASAP, polyurethane is a viable option. But please note that polyurethane does not provide structural strength to the cracked concrete wall after injection.

03. EPOXY FOUNDATION CRACK REPAIR

The Aquaseal® two-part, high solids, Low or Mid viscosity crack injection epoxy is designed to repair cracks in concrete. The mixed adhesive has the viscosity of a light oil and a low surface tension that enables it to penetrate fine to medium width cracks. Resin and hardener is contained in the 2 part cartridge. Once the mixing nozzle is threaded onto the 2 part cartridge, once the materials are in injected and mixed as per manufactures specifications.

Epoxy Crack Injection are only suitable for cracks in poured concrete walls .Pricing for epoxy crack injection are different from company to company keep in mind that there are hundreds of different grades (pricing is applicable to grade of material and manufacturer) of epoxy throughout the industry. Most often the most extremely reputable contractors will be using the best grade of materials available. Most contractors only promote polyurethane injections simply because their profit margins are typically higher especially if they are using a lower grade material. Epoxy Resin Crack Injections one solution for a crack in a basement and is arguably the best repair (ask any structural engineering firm). The reason is that epoxy resin, when injected, low-viscosity crack injection epoxy is designed to repair cracks in concrete. The mixed adhesive has the viscosity of a light oil and a low surface tension that enables it to penetrate fine to medium width settle foundation cracks and also heavier viscosity materials for even wider structural basement repairs. Resin is contained in the cartridge and hardener is contained in the nozzle. Once the nozzle is threaded onto the cartridge, the hardener is released into the resin-filled cartridge, goes into the crack and fills it all the way to the outside. It also provides structural strength and binds the concrete. Epoxy resin is also an inexpensive repair in consideration of the other types of repairs aside from polyurethane which is somewhat the same cost but inferior to epoxy. Epoxy Resin Crack Injections can fill walls up to 24 inches thick. The price of an epoxy crack injection is typically less than 1/3 of the price of excavating and waterproofing from outside. It should be noted that epoxy foundation crack injections are only done on houses with poured concrete foundations. It just can’t be done effectively on stone foundations or rubble foundations and it also isn’t feasible to inject in block foundations because the injection will end up draining into the hollow block core. Pricing for epoxy injection can also vary depending if it’s a 8” poured concrete wall standard poured height or 10” poured wall 8ft – 9ft poured wall or hairline cracks 1/16” or 1/8”-5/8”in gauge.

About Us

11

COMPANY HISTORY

AquaSeal first started out in 1988 and quickly grew to be a leading basement waterproofing company in Southern Ontario. Since then we have repaired over 120,000 foundations.
21

OUR MISSION

We offer you the best services at the right prices. It is our mission to be your hero.
31

COMPANY VISION

Maintaining 100% customer satisfaction has been our companies vision since we first started out.

OUR LATEST WORK

We are proud to present you our latest work that have behind
them a great team, hard labour, and very satisfied clients.
  • epoxy injection
    Epoxy Injection
  • epoxyinjection
    Epoxy Injection
  • Nulla semper neque
Question?
Get a Fast Response
x
Questions - Get Fast Response
We're here to help! In order to help us serve you
better, please provide some information before
speaking with a representative.







Get AquaSeal Pricing Now